BAKFlip MX4 vs Revolver X4s: Which Is Better? (November 2026)
Pick the BAKFlip MX4 for most trucks, because its folding panels leave the bed usable even when open. Choose the Revolver X4s if you want a roll-up cover that tucks against the cab and never blocks your rear view.
On this page (7 sections)
Pick the BAKFlip MX4 for most trucks, because its folding panels leave the bed usable even when open. Choose the Revolver X4s if you want a roll-up cover that tucks against the cab and never blocks your rear view.
This BAKFlip MX4 vs Revolver X4s comparison looks at how each cover opens, how much bed you keep when it's stowed, how each locks and how each handles weather. Both are premium hard covers from RealTruck's BAK line, so the choice comes down to your truck and how you load it.
Best for Silverado and SierraRevolver X4s (Chevy Silverado 5' 8" bed)
BAKFlip MX4 vs Revolver X4s: which should you buy?
The MX4 is the better cover for most truck owners. It scores 9.4 here against 9.2 for the Revolver X4s, and its folding panels give you more ways to use the bed.
The MX4 folds toward the cab in stacked panels. You can open part of the cover, load the front of the bed or drive with all panels folded and the bed fully open.
BAK says the panels secure against the cab so you can drive that way safely. The Revolver X4s rolls up as one unit and stores tight against the cab with a strap and buckle, which gives a cleaner look when open and an unobstructed rear view.
If your main goal is a hard cover that opens out of the way when you haul, the MX4's folding design gives you more options. If you want the low profile of a roll-up and care about seeing clearly behind you when the cover is stowed, the Revolver X4s fits that brief.
The MX4's Gen 3 build uses aluminum side rails and top panels reinforced with high-density polymer cores. BAK rates that design 22 percent stronger than the previous generation.
The X4s wraps heavy-duty aluminum slats in industrial-grade vinyl. The folding cover leans on panel stiffness, while the rolling cover leans on slat strength and a tight roll.
How do the two covers open and stow?
The MX4 opens in folding panels and the Revolver X4s rolls up in one motion. Each design leaves you with a different amount of free bed space when the cover is open.
The MX4's panels fold back toward the cab and stack there. With all panels folded, BAK says you get 100% bed access.
The Revolver X4s rolls forward and secures with a strap and buckle system. BAK says this gives full access to the bed without blocking your sightlines.
The rolled bundle takes up space at the front of the bed instead.
The MX4 gives you more flexibility to open partway. The Revolver X4s gives you a tidier bundle and a clear rear view.
Opening partway
The MX4's folding panels let you peel back one or two sections and leave the rest closed. That helps when you need to grab a tool or load a small box without opening the whole bed.
The Revolver X4s rolls as a single unit. BAK's one-hand operation means you pull down on the tailgate cable to open and roll.
Stowed footprint
Both covers use the cab end for storage when open. The MX4 leaves a stack of panels there.
The Revolver X4s leaves a rolled bundle.
On the X4s the bundle is a compact cylinder, so it eats into bed length but not width. The MX4's stack spreads across the full bed width and rises in steps as each panel lands on the one before it.
What you can see while open
BAK designed the X4s so the rolled cover leaves your rear window and third brake light visible. That matters when the cover stays open on the road.
The MX4's folded stack also sits low at the cab end, but its flat panels take up more of the space right behind the cab where the rear window looks down into the bed.
Which cover locks and seals better?
Both lock along the bed, but each uses a different locking system. The MX4 uses an auto-latch that locks as you close it.
The Revolver X4s uses a rotational lock that runs the full length on both sides.
The MX4's patented auto-latch locking system engages when the cover closes. BAK upgraded the lock components on the latest generation to resist tampering and forced entry.
The cover also uses revised EPDM perimeter seals and tight-fit clamps to keep water out along the bed rails.
The Revolver X4s's rotational locking system secures the cover for the entire length of the bed on both sides when closed. That gives it continuous locking rather than latch points.
BAK also points to newly designed side seals and finished rear corner caps to refine the fit. Both covers aim to keep rain out, but the MX4's design puts more emphasis on the seal details.
The tailgate seal
The MX4's Gen 3 adds a longer dual-action tailgate seal. It weatherproofs the tailgate while keeping the tailgate usable whether the cover is open or closed.
That is the weak point on many covers, since rain can slip in at the gap between the cover's rear edge and the tailgate. The X4s covers the same area with its finished rear corner caps and side seals.
Locking strength in practice
The MX4's auto-latch works on latch points, so the cover locks where the panels meet the rails. The X4s's rotational system locks continuously down both sides.
If you think about prying at one spot, the continuous lock spreads resistance along the rail. The latch system concentrates it at the latches.
Either way, neither cover replaces a locked tailgate or a secure parking spot.
The extreme-weather claim
BAK tests the MX4 from -40 to 180°F and from zero to 95 percent humidity. That range matters for seals, since heat and cold both work on rubber and clamps.
The X4s backs its build with the same five-year guarantee, and BAK finishes both covers in matte black so the surface look holds up.
Which fits your truck bed?
These covers are vehicle-specific, so your truck decides which one you can buy. The MX4 models here fit Ford trucks.
The Revolver X4s models fit Chevy, GMC and Ram.
The MX4 comes in a fit for the 2021–2026 Ford F-150 with the 5' 7" bed, including Raptor and Lightning. A second MX4 fits the 2017–2026 Ford F-250 and F-350 Super Duty with the 6' 10" bed.
The Revolver X4s comes in a fit for the 2019–2026 Chevy Silverado and GMC Sierra with the 5' 8" bed, working with the MultiPro or Flex tailgate but not the Carbon Pro bed. A second X4s fits the 2019–2026 Ram 1500 with the 5' 7" bed.
That spread means the BAKFlip MX4 vs Revolver X4s choice often comes down to what's in your driveway. If you drive an F-150 or Super Duty, the MX4 is the cover built for your truck.
If you drive a Silverado, Sierra or Ram 1500, the Revolver X4s is the matching option.
Matching the bed length
Get the bed length right before you order. An F-150 with the 5' 7" bed takes the first MX4, while the Super Duty's 6' 10" bed takes the second.
The Silverado and Sierra fit covers the 5' 8" bed. The Ram 1500 fit covers the 5' 7" bed.
Tailgate and bed exceptions
Two fit notes deserve a second look. The Silverado and Sierra X4s works with the MultiPro or Flex tailgate, but not the Carbon Pro bed.
The F-150 MX4 lists Raptor and Lightning among the models it covers. Check your truck's exact configuration against the fit notes before you buy.
What does each cover weigh and how hard is install?
Both covers are heavier than a soft roll-up, so plan for help at install. The MX4 for the F-150 has a maximum weight capacity of 54.9 pounds.
The Super Duty version weighs about 70 pounds.
Both Revolver X4s models weigh about 81 pounds.
BAK redesigned the MX4's rail system with a click-in design that the brand says cuts install time by up to 12%. The cover arrives with the tonneau cover, hardware kit and install guide.
The Revolver X4s ships the same way. A heavier cover is more awkward to lift onto the truck and align.
If you're installing alone, the F-150 MX4 is the lightest of these fits. The Revolver X4s is the heaviest, so having a second person helps.
Lifting the cover onto the rails
The F-150 MX4's 54.9-pound figure is a weight capacity, so treat it as the cover's rated load rather than its shipping weight. Lighter is easier when you set the cover on the truck and line up the rails.
Heavier covers take more effort to position and hold while you fix them down. If you install in a driveway without a helper, the F-150 MX4 gives you the best margin.
What BAK includes in the box
Every fit ships with the tonneau cover, a hardware kit and an install guide. The Super Duty MX4 lists its install guide as a QR code, so you may need your phone to open the instructions.
The X4s lists the same three pieces.
Day-to-day handling
The MX4's panels let you open one section at a time. The Revolver X4s's one-hand design is meant to let you roll the whole cover in one pull.
Over months of use, the cover you handle most easily is the one you will open more often.
Which cover suits your cargo and routine?
Choose the MX4 for cargo that needs the full bed open and the Revolver X4s for daily driving with a clear rear view. Your routine decides more than the spec sheet.
If you haul lumber, appliances or anything long and tall, the MX4's full bed access when folded is the practical fit. You can also open one panel to load small items without exposing the whole bed.
If you mostly drive with the cover closed and want a clean look, the Revolver X4s rolls tight and keeps your sightlines clear. Its matte-black slats and aluminum underbody give it a finished look when closed.
Both covers work with a range of truck beds. If you also carry a toolbox, check whether the cover's rails leave room for it; our guide to a tonneau cover with toolbox explains which types fit around a bed box.
If you're weighing a cover against an enclosed top, our tonneau cover vs camper shell comparison helps.
Loading and unloading
The MX4's folding panels give you a step-by-step opening. Fold one panel to reach the middle of the bed, or fold all of them for a full load.
The Revolver X4s opens the whole bed at once. That's quick when you're loading a big item, but you can't leave part of the cover closed over the front of the bed while the rest is open.
Daily driving and long-term wear
The Revolver X4s is built for the driver who leaves the cover closed most days. Its roll-up design and clear rear view suit commuting and errands.
The MX4's panels stack flat when open, which is handy when you need to run with the bed open, though the stack takes up space at the cab end. Both covers finish in matte black, so either one gives your truck a clean, low-profile look.
BAK rates both covers for five years. The MX4's Gen 3 alloy construction pairs aluminum side rails and top panels with high-density polymer cores.
The X4s pairs aluminum slats with a vinyl wrap. How each wears depends on sun and load more than on the spec sheet.
Which BAK cover is the better buy?
The BAKFlip MX4 wins for most readers, with the higher 9.4 score and a more flexible opening. Its folding panels let you open partway or fully, and BAK's auto-latch system locks the cover as it closes.
The Revolver X4s is a close second at 9.2. It's the better pick if you drive a Silverado, Sierra or Ram 1500 and want a roll-up that stows tight and keeps your rear view clear.
Its rotational lock and one-hand operation make it a strong daily cover.
Your truck settles much of the BAKFlip MX4 vs Revolver X4s question, since each cover only fits certain makes and bed lengths. Within a truck that both could fit, choose the MX4 for hauling flexibility and the Revolver X4s for a tidy stow and clear sightlines.
If you're still deciding whether a hard cover is right for you at all, our soft vs hard tonneau cover guide walks through the trade-offs. For a look at how the MX4 compares with a heavier-duty rival, see our BAKFlip MX4 vs Diamondback comparison.
| Product | Best for | Style | Material | Finish | Our score |
|---|---|---|---|---|---|
| BAKFlip MX4 (Ford F-150 5' 7" bed) | F-150 owners | Hard folding | Aluminum | Matte black | 9.4 |
| Revolver X4s (Chevy Silverado 5' 8" bed) | Silverado and Sierra | Hard rolling | Aluminum slats | Matte black | 9.2 |
| BAKFlip MX4 (Ford Super Duty 6' 10" bed) | Super Duty trucks | Hard folding | Aluminum | Matte black | 9.1 |
| Revolver X4s (Ram 1500 5' 7" bed) | Ram 1500 owners | Hard rolling | Aluminum slats | Matte black | 8.9 |
Frequently asked questions
Is the BAKFlip MX4 or the Revolver X4s more secure?
Both lock along the bed, but they work differently. The MX4 uses a patented auto-latching system that locks as the cover closes.
The Revolver X4s uses a rotational locking system that runs the full length of the bed on both sides.
Neither is a vault, but both aim to keep casual hands out.
Can you drive with the BAKFlip MX4 fully open?
Yes. BAK says the MX4 lets you fold the cover to the cab, secure it and drive with the bed fully open.
The panels stack at the cab end, so the tail of the bed stays free for cargo.
Does the Revolver X4s block your rear view when open?
No. BAK designed the X4s to roll tight against the cab and secure with a strap and buckle, so it leaves your sightlines through the rear window and the third brake light clear when open.
The rolled bundle still takes up space at the front of the bed.
Do both covers fit the same trucks?
No. These are vehicle-specific covers.
The MX4 models here fit the Ford F-150 and Ford Super Duty, and the Revolver X4s models fit the Chevy Silverado, GMC Sierra and Ram 1500.
Match the cover to your truck's bed length before ordering.
How much does a BAK hard cover weigh?
It varies by fit. The MX4 for the Ford F-150 has a maximum weight capacity of 54.9 pounds, and the Super Duty version weighs about 70 pounds.
The Revolver X4s models weigh about 81 pounds.
Heavier covers may need two people at install.
About this guide: Our look at BAKFlip MX4 vs Revolver X4s tonneau covers draws on maker specs, materials and what owners report. See how we research.




