Lomax vs BAKFlip MX4: Which Hard Cover to Buy? (November 2026)
The BAKFlip MX4 wins for most buyers because it folds up for near-full bed access and locks automatically. The Lomax wins if you want the cleanest flat look and don't mind lifting panels out when you haul tall cargo.
On this page (9 sections)
- Lomax vs BAKFlip MX4: what actually separates them?
- Which cover gives you the best bed access?
- Which hard cover keeps rain and dust out better?
- Which cover is more secure for tools and gear?
- Which cover is easier to install and live with?
- Who should buy the BAKFlip MX4?
- Who should buy a Lomax cover?
- How does the MX4 compare with other hard covers?
- The verdict: which hard cover should you buy?
The BAKFlip MX4 wins for most buyers because it folds up for near-full bed access and locks automatically. The Lomax wins on looks and simplicity if you want a flat, low-profile cover and rarely haul tall loads.
In this lomax vs bakflip mx4 comparison, the practical tiebreaker is how often you need the whole bed open.
The MX4 is a hard folding cover with aluminum panels. It folds toward the cab in sections, so you can open most or all of the bed without taking the cover off.
That flexibility is the main reason it suits daily drivers.
A Lomax hard cover is the cleaner, flatter option. It gives a smooth, low-profile look when closed and keeps the bed covered for everyday hauling.
The trade-off is that it is less quick to clear out of the way for big items.
Best for heavy-duty haulingBAKFlip MX4 for Ford F-250/350 Super Duty 6' 10" Bed
Lomax vs BAKFlip MX4: what actually separates them?
The MX4 is the better all-rounder for truck owners who mix daily driving with weekend projects. It folds back to open the bed, and BAK's auto-latch system locks it down when you close it.
That combination fits the way most people use a pickup.
A Lomax hard cover is more about a clean finish. The panels sit flat and close to the bed rails for a low-profile look.
If you mostly carry bags, groceries and tools under a locked lid, that style works well.
The MX4 gives you more ways to use the bed. Fold one panel for a quick reach, fold more for a load of lumber or a moving box.
BAK says the cover folds to the cab and you can drive with it fully open once secured.
Where the two covers split is on flexibility versus simplicity. The MX4's folding panels do more jobs.
A flat cover does one job very well: it covers the bed and looks tidy doing it.
| Product | Best for | Fit | Material | Access | Our score |
|---|---|---|---|---|---|
| BAKFlip MX4 for Ford F-150 5' 7" Bed | most truck owners | 2021-2026 Ford F-150 5' 7" bed | Aluminum | Folds to the cab | 9.4 |
| BAKFlip MX4 for Ford F-250/350 Super Duty 6' 10" Bed | heavy-duty hauling | 2017-2026 Ford F-250/350 6' 10" bed | Aluminum | Folds to the cab | 9.1 |
Which cover gives you the best bed access?
The BAKFlip MX4 gives you more usable bed access because the panels fold instead of coming off. You can open part of the cover for a small load or fold it fully to the cab for a large one.
BAK calls this 100% bed access, and the cover stays on the truck.
A Lomax-style cover does not fold to the cab the same way. To use the full bed you typically lift panels out or remove the cover, which means finding somewhere to set it and putting it back later.
That is fine for occasional big loads.
If you carry tall cargo every week, the folding design is the difference between a 30-second job and a two-step job. If your cargo fits under a closed cover most days, the access gap matters much less.

This MX4 fits the 2021-2026 F-150 5' 7" bed and folds to the cab so the whole bed opens without removing it.
See it on AmazonHow the MX4's fold works in daily use
The panels stack near the cab when fully open. That stack takes up bed space, so measure how much cab-side room your usual loads need.
For long items like lumber or a ladder, the stack can sit under the load.
BAK says the cover secures when folded and you can drive with it fully open. That helps when you need the bed open on the way to the job and closed on the way home.
You do not leave panels behind in the garage.
On the F-150 model, the cover fits the 2021-2026 truck with the 5' 7" bed. The Super Duty version fits the 2017-2026 F-250/350 with the 6' 10" bed.
Pick the fit that matches your truck before comparing anything else.
What a flat cover offers instead
A Lomax cover sits flat and close to the rails, so the truck looks clean when covered. If the truck doubles as a daily driver and you like a low, even profile, that finish is the draw.
You get a bed that stays covered and locked without a folded stack near the cab.
The cost is flexibility. When the full bed is needed, you handle the panels rather than folding them back.
That trade favors owners who keep the cover closed most of the time and only open it now and then.
Which hard cover keeps rain and dust out better?
The BAKFlip MX4 has the stronger weather story on paper, with revised seals and tight-fit clamps. BAK says the seals and clamps fit tighter to keep water out, and the cover is tested from -40 to 180°F at zero to 95% humidity.
A Lomax cover also seals at the rails, but the MX4's weather details are more specific.
Both covers sit above the bed on rails and use seals along the edges. Neither makes the bed a sealed box.
Water can still find gaps around the tailgate and cab corners on any cover.
For work gear that must stay dry, keep it in a sealed tote or a waterproof bag. The cover reduces rain and snow intrusion, but it is not a replacement for a dry container.
This matters if you carry electronics, tools or paperwork.

The Super Duty version brings the same seals and tight-fit clamps to the 2017-2026 F-250/350 6' 10" bed.
See it on AmazonWhich cover is more secure for tools and gear?
The BAKFlip MX4 offers the more complete locking setup, with an upgraded auto-latch that secures the cover when it closes. BAK says the locking components are designed to resist tampering and forced entry.
That gives you a locked lid over the bed as part of your normal parking routine.
A flat hard cover locks too, and a solid panel over the bed is the main theft deterrent. The difference is in the details.
The MX4's latch engages as you close it, so you are less likely to drive away with the cover unlatched.
Security is not the only concern. A hard cover is only as strong as its mounting and latches.
Check that the rails and clamps are tight after installation, and recheck them after the first few weeks of driving.

The auto-latch locking system locks the cover down as it closes, so the bed stays covered when you park.
See it on AmazonLocking with the tailgate
Both covers lock against the tailgate on many trucks. If your tailgate locks, the closed cover and locked tailgate work together as one barrier.
That is the standard setup for a hard cover.
If your tailgate does not lock, the cover's latch is your only lock. A cover that locks on its own is more useful in that case.
Check your truck's tailgate before you rely on the cover alone.
Which cover is easier to install and live with?
The BAKFlip MX4 is the easier install of the two, with a click-in rail system and clamp-on mounting. BAK says the new rail system cuts install time by up to 12 percent compared with the previous generation.
A Lomax cover also mounts with rails and clamps, so both are DIY-friendly.
Plan for a helper when you lift the cover onto the truck. The F-150 MX4 box weighs about 55 pounds, and the Super Duty version weighs about 70 pounds.
Two people make the lift safer and quicker.
Day to day, the MX4 asks less of you. Fold it when you need the bed, close it when you are done, and let the latch do its job.
A flat cover is simpler still when closed, but more work when you need the bed open.
Check that the rails sit evenly on both sides before you tighten the clamps. A rail that is off by a little can make the cover hard to latch or leave a gap at the seal.
Follow the included install guide and hardware kit.
Care and long-term wear
Both covers are aluminum, so they resist rust. The finish is the part that wears.
Matte finishes can show scratches and scuffs from tools and cargo, so slide heavy items rather than dragging them.
Wash either cover with mild soap and water, and rinse off road salt in winter. Keep the seals clean so they can do their job.
A dirty seal can let water past even on a good cover.
Check the latch and hinges now and then. A little lubrication on the moving parts keeps the fold smooth.
Tighten clamps if the cover starts to feel loose.
Who should buy the BAKFlip MX4?
Buy the BAKFlip MX4 if you want a hard cover that opens fully for cargo and locks itself when closed. It suits owners who use the bed for both daily errands and weekend projects.
The folding panels mean you rarely need to remove the cover.
The MX4 also fits if security is a priority. The auto-latch system and the aluminum panels give you a locked lid over the bed.
BAK backs it with a five-year warranty.
Pick the F-150 version for the 2021-2026 truck with the 5' 7" bed. Pick the Super Duty version for the 2017-2026 F-250/350 with the 6' 10" bed.
Both carry the same design and the same locking layout.
If you also run a toolbox in the bed, check how the cover works with it before you buy. Our guide to a tonneau cover with toolbox covers the types that fit around one.
Who should buy a Lomax cover?
Buy a Lomax cover if you want the flattest, cleanest look and keep the cover closed most of the time. It suits owners who value a low-profile finish and simple operation over quick full-bed access.
The flat panels sit close to the rails for a tidy appearance.
A Lomax also makes sense if you rarely haul tall cargo. If your loads fit under the closed cover, you do not need the folding feature.
You get a locked, flat lid without a folded stack near the cab.
Skip it if you open the full bed often. Lifting panels out and storing them adds steps to every big load.
For frequent hauling, the folding MX4 is the easier cover to live with.
Not sure whether a hard cover is right for you at all? Our soft vs hard tonneau cover comparison covers the trade-offs in cost, security and weight.
A soft cover is lighter and cheaper, but it offers less protection.
How does the MX4 compare with other hard covers?
The BAKFlip MX4 is one of the best-known hard folding covers, and it holds up well against the Diamondback line. A Diamondback cover is a heavier-duty option built for serious hauling and load support.
The MX4 is lighter and easier to fold for everyday use.
If you carry heavy equipment on top of the cover or need a work surface, a Diamondback may suit you better. If you want a cover that folds away quickly and locks when closed, the MX4 is the simpler pick.
Our BAKFlip MX4 vs Diamondback comparison breaks down the difference.
The MX4's main edge is flexibility. It covers the bed when closed and opens fully when you need it.
That makes it a good fit for a truck that does many jobs.
If your plans include a camper shell instead of a cover, that changes the comparison. A tonneau cover vs camper shell guide helps you decide which suits your cargo and travel style.
The verdict: which hard cover should you buy?
For most buyers, the BAKFlip MX4 is the better hard cover. In this lomax vs bakflip mx4 decision, the folding panels, auto-latch locking and full bed access give it the edge for everyday truck use.
The F-150 model scores 9.4 and the Super Duty model scores 9.1, and either is the pick over a flat cover for most owners.
Choose the MX4 if you want a cover that opens fully without coming off and locks itself when closed. It fits the 2021-2026 F-150 5' 7" bed or the 2017-2026 F-250/350 6' 10" bed, and BAK backs it with a five-year warranty.
Choose a Lomax cover only if the flat, low-profile look is your top priority and you rarely need the whole bed open. It is a fine cover for a truck that stays covered, but it asks more of you when cargo gets tall.
Either way, measure your bed length and check the fit before you order. Then decide how often you need the full bed open.
That answer picks the cover for you.
Frequently asked questions
Is a Lomax or BAKFlip MX4 better for hauling tall cargo?
The BAKFlip MX4 is the easier choice for tall cargo because its panels fold to the cab without coming off. A Lomax-style tri-fold usually asks you to lift panels out to clear the full bed, so the MX4 saves time on repeated hauls.
Do these hard covers keep rain out of the bed?
Both are built to shed water, and the MX4 adds revised perimeter seals and tight-fit clamps. No hard cover makes the bed fully waterproof, so store anything that must stay dry in a sealed container.
Can I drive with a BAKFlip MX4 folded open?
Yes. BAK says the MX4 folds to the cab and you can drive with the cover fully open once it is secured.
Check that the folded stack is latched and clear of the rear window before you move.
Do I need to remove either cover to load a large item?
The MX4 folds back so you can load the bed without taking it off. A Lomax-style cover is often removed or partly lifted for oversized cargo, which means more handling before and after the load.
About this guide: Our look at Lomax vs BAKFlip MX4 hard tonneau covers draws on maker specs, materials and what owners report. See how we research.



