Comparison

TonnoPro Tri-Fold vs BAKFlip: Which Fits You? (November 2026)

Updated on · By the SidekickSays team

Pick a BAKFlip hard folding cover for lockable security and a TonnoPro tri-fold for a light, low-cost cover. In the TonnoPro tri-fold tonneau cover vs BAKFlip matchup, the BAKFlip MX4 is the better cover for most truck owners who park outside or carry tools.

On this page (11 sections)
  1. TonnoPro tri-fold vs BAKFlip: the quick verdict
  2. How the two covers compare side by side
  3. Security is the first deciding point
  4. Bed access and daily use
  5. Panel build and weather protection
  6. Which bed lengths and trucks fit?
  7. Price tier and what you get for it
  8. Who should buy the BAKFlip?
  9. Who should buy the TonnoPro tri-fold?
  10. Which cover fits how you use the truck?
  11. The verdict on TonnoPro tri-fold vs BAKFlip

Pick a BAKFlip hard folding cover for lockable security and a TonnoPro tri-fold for a lighter, lower-cost cover. In this TonnoPro tri-fold tonneau cover vs BAKFlip comparison, the BAKFlip MX4 is the better fit for most truck owners, while the TonnoPro tri-fold wins on budget and simplicity.

The choice comes down to what you store in the bed and where the truck parks. A tonneau cover that locks with the tailgate protects tools and gear.

A soft tri-fold keeps rain off groceries and lumber for less money.

Both cover styles fold open from the cab side. The real gap sits in the panels, the locking, and how much you want to spend.

RealTruck BAK BAKFlip MX4 Hard Folding TruckBest for lockable security

RealTruck BAK BAKFlip MX4 Hard Folding Truck

9.4/10Our score

See it on Amazon

RealTruck BAK BAKFlip MX4 Hard Folding TruckBest for long-bed F-150s

RealTruck BAK BAKFlip MX4 Hard Folding Truck

9.2/10Our score

See it on Amazon

TonnoPro tri-fold vs BAKFlip: the quick verdict

The BAKFlip MX4 takes the overall win for most readers, and the TonnoPro tri-fold is the better buy when budget leads. Our score weighs specs, features and buyer feedback against what you're shopping for.

The MX4 here is an aluminum hard folding cover with panels that latch on their own. It locks when the tailgate closes, so the bed stays shut when you walk away.

A TonnoPro tri-fold is a soft cover made from a vinyl tarp stretched over aluminum frame rails. It folds in three sections, costs less, and suits truck owners who want a basic cover without the security step.

If you park on a driveway or carry tools and equipment, the hard cover is worth the extra money. If your truck sits in a garage and the bed holds mostly luggage and groceries, the tri-fold does the job.

How the two covers compare side by side

The main differences are panel material, locking and how the cover opens. The table below puts the BAKFlip MX4 and a typical TonnoPro tri-fold next to each other.

FeatureBAKFlip MX4 hard foldingTonnoPro tri-fold
Panel buildAluminum panels over polymer coresVinyl tarp on aluminum frame rails
SecurityPanels latch and lock with the tailgateStraps and buckles
Open styleFolds and flips up against the cabFolds in three sections
Bed accessFull access when flipped upFull access when folded forward
Fit options2015-2020 Ford F-150, 5' 7" and 6' 7" bedsSeveral truck makes and bed lengths
FinishMatte black, scratch and UV resistantVinyl top, typically gloss or matte
WarrantyExtended 5 Year WarrantyVaries by seller and model

The MX4's matte-finish aluminum panels protect against marks, scratches and UV damage. That matters if the truck sits in the sun or carries lumber and mulch bags that scuff a soft top.

The TonnoPro tri-fold's vinyl stretches tight over its frame and sheds water. It's lighter to lift and cheaper to replace if it ever tears.

Neither cover keeps a determined thief out forever. The difference is that a locked hard cover makes casual grabbing much harder, while a soft cover only slows someone down.

Security is the first deciding point

If you carry tools or valuables, the BAKFlip wins because its panels lock with your tailgate. The MX4 panels latch automatically as the cover closes, and the cover is fully locked once the tailgate is shut.

That design ties bed security to your truck's tailgate lock. Lock the truck and the cover stays shut.

Leave the tailgate open and the cover can be lifted.

The TonnoPro tri-fold uses straps and buckles along the frame rails. It seals the bed against rain and wind, but it doesn't lock.

Anyone who can reach the buckles can open it.

For a work truck that carries a chop saw or a toolbox, this gap is the whole decision. For a weekend truck that hauls mulch and camping gear from a garage, the strap system is fine.

Security also shapes where you park. A locked hard cover lets you leave the truck overnight in a lot without unloading the bed first.

A soft cover usually means clearing the bed or accepting some risk.

Bed access and daily use

Both covers give full bed access, but the BAKFlip opens in bigger steps and the tri-fold opens faster. The MX4 folds and flips up without covering the third brake light, so you can drive with the bed open.

Its panels fold section by section. You can leave part of the bed closed and open the rest for a tall item.

That's useful when you carry a mix of covered gear and something upright.

The TonnoPro tri-fold folds in three sections and rests near the cab when fully open. Lifting it takes less strength than a stack of aluminum panels, which helps on short beds.

Daily use is where the tri-fold feels simpler. Pull two straps, fold, and load.

The MX4 needs the tailgate open first and the panels folded back in order.

That extra step is the price of security. Owners who load the bed several times a day may find the hard cover slower, while people who load once a trip won't notice.

Panel build and weather protection

The MX4's aluminum panels resist scratches and UV damage better than a vinyl top; the tri-fold's vinyl is easier to replace. This matters most for trucks that park outside year round.

The BAKFlip uses heavy-duty aluminum side rails and top panels, reinforced with high-density polymer cores. Revised EPDM perimeter seals and tight-fit clamps help keep water from running along the bed rails.

The dual action tailgate seal weatherproofs the tailgate while letting it open or close. The matte finish also means less glare and fewer visible fingerprints than a gloss top.

A TonnoPro tri-fold's vinyl top is the part that takes the sun. Vinyl can fade or flap at speed over time, though it's usually the cheaper part to replace.

Both covers keep rain off the load. The difference shows up in how the cover looks after a few summers of parking under an open sky.

Which bed lengths and trucks fit?

Fit is the second deciding point, and the BAKFlip MX4 here only fits 2015 to 2020 Ford F-150 beds. The two products cover different lengths: 5 feet 7 inches and 6 feet 7 inches.

The 5' 7" version measures 67.1 inches of bed. The 6' 7" version covers 78.9 inches.

Order the part number that matches your truck, because the two are not interchangeable.

A TonnoPro tri-fold is sold in a wider spread of truck makes and bed lengths. That's a real advantage if you drive a different brand or an older model the MX4 doesn't fit here.

Check your bed length with a tape measure before ordering either cover. A truck listed as "short bed" or "standard bed" can still differ by a few inches between cab styles and trim levels.

The BAKFlip MX4 for the 5' 7" bed and the 6' 7" version are the two covers compared here. If your truck falls outside those fits, look at the wider tri-fold options instead.

Price tier and what you get for it

The BAKFlip sits in a higher price tier and the TonnoPro tri-fold in a budget tier, and the gap buys security and panel durability. Neither is cheap, but they buy different things.

The hard cover's extra cost goes into aluminum panels, a latching system and a matte finish. It also carries an Extended 5 Year Warranty from BAK.

The tri-fold's lower cost goes into a vinyl top and frame rails. It's the cover you buy when the budget is fixed and rain protection is the main goal.

Work out how long you plan to keep the truck. A hard cover spread over several years often costs less per year than replacing a worn soft top.

A leased truck may not be worth the extra spend.

Who should buy the BAKFlip?

Buy the BAKFlip MX4 if you park outside, carry tools or want the bed locked when you leave the truck. It's the better fit for owners who treat the bed as a storage locker.

The 5' 7" MX4 suits 2015 to 2020 Ford F-150 owners with the shorter bed. The 6' 7" version covers the longer bed on the same truck years.

The best tri fold tonneau cover roundup covers both hard and soft folding options if you want to compare more than two. That's the place to check if a different brand fits your truck better.

Skip the MX4 if your truck lives in a garage and the cover only needs to keep rain off. You'd be paying for a lock you rarely use.

Who should buy the TonnoPro tri-fold?

Buy a TonnoPro tri-fold if budget is tight, the truck stays mostly garaged, or you want a cover you can lift with one hand. It's the lighter, simpler option for light hauling.

It suits owners who mainly carry groceries, luggage and camping gear. The vinyl top keeps rain out and folds forward for tall loads without much effort.

Skip it if your bed holds tools overnight or the truck parks on the street. The lack of a lock is the weak point, and no amount of strap tension fixes that.

If you keep a toolbox in the bed, our guide to a tonneau cover with toolbox explains which cover types fit around a fixed box. A tri-fold often leaves more room for a low box than a hard folding cover.

Which cover fits how you use the truck?

The BAKFlip fits work and security first; the TonnoPro tri-fold fits budget and light use first. Decide by what sits in the bed overnight and how long you plan to keep the truck.

Security tops the list for most owners. If the answer to "would I be upset if this went missing?" is yes for anything in the bed, choose the locking cover.

Budget follows. If the truck is leased, garaged or used for weekend errands, the tri-fold covers the basics for less.

Fit comes third, and it can override both. The MX4 here fits only 2015 to 2020 Ford F-150 beds, so owners of other trucks start with tri-fold options and work from there.

If you're weighing an open bed against a fully enclosed one, our tonneau cover vs camper shell comparison helps you decide whether a cover is the right add-on at all. And if you're still unsure between soft and hard, the soft vs hard tonneau cover guide walks through the trade-offs in more detail.

The verdict on TonnoPro tri-fold vs BAKFlip

The BAKFlip MX4 is the better cover for most truck owners, and the TonnoPro tri-fold is the better budget pick. This TonnoPro tri-fold tonneau cover vs BAKFlip call comes down to security and panel life against upfront cost.

Pick the BAKFlip MX4 in the 5' 7" fit if your 2015 to 2020 Ford F-150 has the shorter bed. Pick the 6' 7" version if your truck has the longer bed.

The MX4 locks with the tailgate and resists scratches better than vinyl.

Pick a TonnoPro tri-fold if you want rain protection at a budget price tier and don't need a lock. It folds faster and lifts easier, which suits light weekend use.

Either way, measure your bed first. A cover that doesn't fit your truck is the one decision you can't undo.

Frequently asked questions

Is a BAKFlip better than a TonnoPro tri-fold?

A BAKFlip is better if you want lockable security and aluminum panels. A TonnoPro tri-fold is the better value if you mainly want rain protection and a low-profile look at a budget price tier.

Pick by whether locking the bed matters to you.

Does the BAKFlip MX4 lock?

Yes. The MX4 panels latch as the cover is partly or fully closed, and the cover locks once your tailgate is shut.

That means the tailgate has to be closed and locked for the cover to stay secure.

Can I open the tailgate with the BAKFlip closed?

Yes. The dual action tailgate seal lets the tailgate open or close with the cover in place.

The cover must be unprotected via the tailgate to fold it.

Will the BAKFlip fit a 2015 to 2020 Ford F-150?

The MX4 covers here fit the 2015 to 2020 Ford F-150 in two bed lengths: 5 feet 7 inches and 6 feet 7 inches. Measure your bed before ordering, because the two part numbers are not interchangeable.

Do I lose bed access with a folding cover?

No. The BAKFlip folds and flips up for full bed access, and it doesn't cover the third brake light in the up position.

A tri-fold also folds in sections, so you can open part of the bed for taller cargo.