Comparison

RetraxPRO vs BAKFlip: Which Suits Your Pickup? (November 2026)

Updated on · By the SidekickSays team

Choose a RetraxPRO for a lockable cover that slides into a hidden canister and frees the whole bed; choose a BAKFlip if you want a folding panel cover you can open and close in seconds. In the RetraxPRO tonneau cover vs BAKFlip decision, bed space and how you load cargo matter more than looks.

On this page (9 sections)
  1. Which cover suits your truck bed best?
  2. Retractable vs folding: what changes day to day?
  3. How much bed space does each cover leave open?
  4. How secure is each cover?
  5. Which cover is easier to install and live with?
  6. Which cover handles weather and cargo weight better?
  7. How does the RetraxPRO XR change the picture?
  8. Who should buy which cover?
  9. Verdict: which tonneau cover wins?

Choose a RetraxPRO for a cover that slides into a hidden canister and frees the whole bed; choose a BAKFlip if you want folding panels you can open and close in seconds. In the RetraxPRO tonneau cover vs BAKFlip comparison, the real question is how you load your truck and how much bed depth you can give up.

The RetraxPRO MX is the highest-scoring cover here at 9.7. It rolls on aluminum slats, locks at any point along the rails and hides its canister flush inside the bed.

The BAKFlip MX4 is a hard folding cover that flips to the cab and latches itself when you close it. Both are aluminum covers from RealTruck, and both keep cargo out of the weather.

They differ in how they open, where they store and what they do to your usable bed space. That is the whole decision, and this guide walks through each point so you can pick with confidence.

RealTruck Retrax RetraxPRO MX Retractable Truck BedBest for full-bed access

RealTruck Retrax RetraxPRO MX Retractable Truck Bed

9.7/10Our score

See it on Amazon

RealTruck Retrax RetraxPRO XR Retractable Truck BedBest for cargo add-ons

RealTruck Retrax RetraxPRO XR Retractable Truck Bed

9.6/10Our score

See it on Amazon

Which cover suits your truck bed best?

Pick the RetraxPRO MX if you want one cover that stays mounted and rolls out of the way; pick the BAKFlip MX4 if you want panels that fold up and lock on their own. The RetraxPRO MX fits 2019 to 2026 Chevy and GMC Silverado and Sierra trucks with the 5 foot 10 inch bed and works with the MultiPro or Flex tailgate, as long as the truck does not have the Carbon Pro bed.

The BAKFlip MX4 also comes in a version for that same GM bed, and another for Ford F-250 and F-350 Super Duty trucks with the 6 foot 10 inch bed. If you drive a Ram 1500 with the 5 foot 7 inch bed, the RetraxPRO XR is the one built for you, though it does not fit the Multi-Function split tailgate.

Fit is the first thing to settle. A cover that does not match your bed length, tailgate type or bed material is not a real option no matter how good the design is.

Retractable vs folding: what changes day to day?

A retractable cover opens along rails and stores in a canister; a folding cover opens in panels that stack against the cab. That difference shapes how fast you get into the bed and how much room you have once it is open.

The RetraxPRO covers use a sealed ball-bearing roller system. A handle glides the cover along the rail, so there are no pull straps, snaps or springs to deal with.

You can stop and lock the cover anywhere on its track, which makes it easy to leave a gap for tall items. The BAKFlip MX4 opens in sections, so you can fold one panel to reach the front of the bed or fold all of them to the cab for full access.

The Gen 3 design uses a click-in rail system that BAK says cuts install time, and the panels latch automatically when you drop the cover shut.

When quick access matters more

A folding cover wins when you make short stops and need the bed open for a minute. You flip a panel or two, grab what you need and close it.

A retractable cover suits drivers who want to slide the cover back with one hand while standing at the tailgate. It feels more like a drawer than a lid.

How much bed space does each cover leave open?

The RetraxPRO leaves the full bed open when rolled back but keeps a canister at the cab; the BAKFlip gives 100 percent access when folded. That difference matters most when you carry long or tall loads.

The RetraxPRO MX stores its slats in a canister that lies flush with the cover and hides inside the bed. The canister is compact and stays out of sight, but it still takes up depth at the cab end.

The BAKFlip MX4 folds all the way to the cab and lets you drive with the cover fully open. You get the whole bed, floor to cab, with nothing sitting in the way.

For a work truck that alternates between a closed bed and a full load, that is a real advantage.

Loading long and tall cargo

Long pipes and lumber sit flat against the floor on either cover once the lid is back. The difference shows up when you fill the front of the bed and need every inch.

With the RetraxPRO, plan around the canister when you load at the cab end. With the BAKFlip, the folded panels stack against the rear window and sit above the cab end of the bed, so the floor stays clear.

Our look at hard tonneau covers vs soft ones helps if you are still weighing the basic cover type.

How secure is each cover?

Both covers lock, but the RetraxPRO lets you lock the lid at any position while the BAKFlip locks itself when closed. Security is close enough that cargo habits matter more than the lock type.

The RetraxPRO has a key lock that works at any point along the rails. You can leave the cover partway open for a tall item and still keep it locked.

The slats are aluminum and the cover carries a lifetime warranty.

The BAKFlip MX4 uses an auto-latching system. BAK says the Gen 3 design adds resistance to tampering and forced entry, and the cover uses a tailgate lock type.

BAK backs the MX4 with a 5-year warranty.

What neither cover does

No tonneau cover turns a truck bed into a safe. A determined thief can still find a way in.

If you carry tools or valuables, lock the tailgate, keep the cover closed and park where you can see the truck. The RetraxPRO MX's key lock in any position gives it an edge when you need a gap for a load and want the rest of the bed covered.

Which cover is easier to install and live with?

Both mount with clamp-on rails and basic tools, though the folding cover comes off more easily when you need a bare bed. Think about how often you remove the cover, not just how often you open it.

RetraxPRO covers mount with a clamp-on design. You bolt the cover in place and you are ready to go.

The canister stays in the bed, so the cover becomes part of the truck rather than something you take on and off.

The BAKFlip MX4 sits on rails with clamps. The panels fold up, and the whole cover can come off when you need the bed completely clear.

That helps when you carry a camper or a tall load that will not fit under a folded cover.

Weight and daily handling

The RetraxPRO MX weighs about 90 pounds. That is a lot of hardware to move, and it is one reason the canister stays put.

The folding cover for the Super Duty weighs about 70 pounds.

A folding cover is easier to lift and remove by yourself. A retractable cover is easier to open and close with one hand every day.

Choose based on whether you remove the cover or just open it.

Which cover handles weather and cargo weight better?

Both are aluminum covers rated to carry weight on top, and the RetraxPRO carries a longer warranty. Weather sealing is close, so weight and warranty are the clearer differences.

The RetraxPRO covers hold up to 500 pounds of evenly distributed weight. The slats are matte powder-coated for scratch resistance and UV protection.

Retrax backs both models with a lifetime warranty.

The BAKFlip MX4 uses heavy-duty aluminum side rails and top panels with high-density polymer cores. BAK says the Gen 3 design is 22 percent stronger than the previous generation and was tested from -40 to 180 degrees Fahrenheit.

Revised EPDM seals and tight-fit clamps aim to keep water out along the rails, and BAK covers it for 5 years.

Sealing and water management

Both covers use seals along the bed rails. The BAKFlip MX4 adds a longer dual-action tailgate seal that weatherproofs the tailgate while keeping it usable whether the cover is open or closed.

The RetraxPRO MX aims for a tight seal from its flush canister and low-profile rails.

Neither cover makes the bed fully waterproof. Water can still find a path at the corners or under the rails.

If you carry gear that must stay bone dry, keep it in a sealed container or a weatherproof box.

How does the RetraxPRO XR change the picture?

The RetraxPRO XR adds T-slot rails so you can mount racks and carriers on top, which the standard MX and the BAKFlip do not offer. That makes it the pick for overlanding and cargo-carrying setups.

The XR uses the same aluminum slats and key lock in any position as the MX. Its Trax Rail System is compatible with most T-slot accessories, and Retrax names Rhino, Thule and Yakima add-ons as partners.

You can carry bikes, kayaks or a cargo box above the cover.

If you plan to add a roof rack over the bed or a bike carrier, the XR saves you from buying a separate rail kit. If you just want a cover over the bed, the MX does the same job without the accessory rails.

The XR fits 2019 to 2026 Ram 1500 trucks with the 5 foot 7 inch bed.

When the accessory rails are worth it

Choose the XR if your truck is a base for trips. The rails turn the cover into a platform, and the sliding lid still gives you bed access.

Skip it if you never carry anything on top.

Who should buy which cover?

Buy the RetraxPRO MX if you want the best mix of security, full-bed access and warranty; buy a BAKFlip if you fold often and want the panels out of the way. The MX takes the overall win here at 9.7.

The RetraxPRO MX suits drivers who want a cover that stays mounted, locks anywhere on its track and hides its storage in the bed. It is the top pick for most readers who want a retractable cover.

Its lifetime warranty and 500 pound capacity are the strongest combo in this group.

Choose the RetraxPRO XR if you want to mount racks and carriers on top. It gives up a little simplicity for the Trax Rail System and still locks in any position.

The BAKFlip MX4 for GM trucks is the best folding choice for most drivers. It opens fast, folds to the cab for full bed access and latches itself when closed.

Pick the Super Duty version if you drive an F-250 or F-350.

Quick fit check before you buy

Match the cover to your exact truck first. Check bed length, tailgate type and whether your truck has a carbon composite bed.

A cover for a 5 foot 10 inch GM bed will not fit a 5 foot 7 inch Ram or a 6 foot 10 inch Super Duty.

If you also run a truck toolbox, look at which tonneau covers fit with a toolbox. A retractable canister can crowd the front of the bed where a toolbox sits, so measure before you commit.

If you are deciding between a cover and a full enclosure, our tonneau cover vs camper shell guide covers the trade-offs. And if folding covers interest you but you want a lower-cost option, the Tonno Pro tri-fold vs BAKFlip comparison is worth a read.

Verdict: which tonneau cover wins?

The RetraxPRO MX wins for most buyers who want a secure, low-profile cover that rolls out of the way. It locks in any position, carries 500 pounds and comes with a lifetime warranty.

The BAKFlip MX4 is the better pick when you open and close the cover all day and want panels that stack against the cab. It gives you 100 percent bed access and locks itself when closed.

If you plan to add racks or carriers, choose the RetraxPRO XR. If you drive a Ford Super Duty, the BAKFlip MX4 built for that bed is your folding option.

In the retrax pro tonneau cover vs bakflip choice, match the cover to how you load your truck, then pick the design that keeps your bed useful.

Frequently asked questions

Is a RetraxPRO better than a BAKFlip?

A RetraxPRO is better if you want a lockable cover that slides into a hidden canister and leaves the full bed open. A BAKFlip is better if you want panels that fold to the cab and lock automatically when closed.

Pick by how often you load the whole bed.

How much bed space does a RetraxPRO canister take up?

The RetraxPRO stores its slats in a canister that sits flush inside the bed at the cab end. The cover leaves the rest of the bed open when rolled back, but you lose some depth at the front for the housing.

Measure that area before you plan long cargo.

Can you drive with a BAKFlip cover fully open?

Yes. BAK says you can fold the MX4 panels to the cab, secure them and drive with the cover fully open.

That gives you 100 percent bed access when you need to carry tall or long items, unlike a retractable cover that leaves its canister in place.

Do these covers fit the same trucks?

No. The RetraxPRO MX fits 2019 to 2026 Chevy and GMC Silverado and Sierra trucks with the 5 foot 10 inch bed.

The RetraxPRO XR fits 2019 to 2026 Ram 1500 trucks with the 5 foot 7 inch bed.

The BAKFlip MX4 comes in versions for GM and Ford Super Duty beds.

Are RetraxPRO and BAKFlip covers lockable?

Both lock. The RetraxPRO has a key lock you can set at any position along the rails.

The BAKFlip MX4 uses an auto-latch system that secures the cover when closed, plus a tailgate lock type.

Neither turns your bed into a vault, so keep valuables out of sight.